Rear Hub Spacers

Jim S. is slowly working at finishing a Clubman project built from bits from my shed - that I had started with Mike A. many years earlier. This one has been years in 'the process' - but is gradually creeping along. Jim ran across a fitting problem, with a good used correct speedo gearbox I had posted him for the project. It turns out I had set the bike up with spacers for the early type Smiths drive gearbox, and the only good one I recently sourced was a late one ! - & confirmed by Jim's measurements. I carry a pretty extensive parts supply and pulled out the correct set to send him, and the set used when fitting the narrow hard to find gearbox - to compare .